Full carbon Fiber MTB Bike Flat Bar 31.8 600mm UD Clear Coat Handlebar AHB11

Description

New Full carbon fiber light weight MTB flat bar 31.8 UD finish clear coat
New super ergonomic form, On the top: flat like a XC bar. On the lower side like a low riser. Like this it’ll always fit… without spacer stacks, Can be very light-weight, but also very malicious in terms of safety. To achieve the high safety, it uses a new type of fiber and a complex arrangement of the individual fiber layers combined with a loading optimized cross section. Especially critical areas were additionally reinforced, this handle bar isn't only stronger than others, but it also absorbs smaller impacts and vibrations better thanks to its outstanding dampening characteristics - as well as offering an incredible steering precission.
Specification & physical property standard
Model
AH
B11
Material
Full Carbon
Bar Bore
Ф31.8mm
Width
600mm
Sweep back
9 degrees
Rising up
5 degrees
Weight
155+/-8(g)
Outlook
UD finish/ clear coat finishing
Center part (mm)
31.8 +0.1/-0.3
Grip(mm)
22.2±0.2
Single side strength (kgf)
≧
250
Center part clamping force (N.m)
8.4N.m
Grip part clamping force (N.m)
6N.m
Double side Anti-bending strength
/
Single side Anti-bending strength
/
Product description
This AHB11 is providing comfort and control to leader with high performance material property, precise carbon prepreg in lamination and molding. The process is using EPS mandrel to get perfectly layup surface for each carbon layer.
l
You could not find any local fiber wrinkle and avoid in each layer. The outer layer takes advantage of uni-direction carbon with sands painting
on the middle bar
to provide very nice out looking and high frication resistibility.
l
9
degrees sweep
back and 5 degrees rising up.
l
The carbon fiber research and development engineers have taken the best designs for the handlebar to be qualified by
CEN14766:2005.CEN14766:2005 4.7.6.4 and CEN14766:2005 4.7.7 testing standard.
Product specification
l
Material: High performance full carbon prepreg with Toray
high modulus
M30S and T700 materials.
l
Weight: 1
55
+/-8 grams.
l
Outlook: UD Carbon with clear coat finishing.
l
Width: 6
0
0mm and 5 degrees
rising up
l
Dimension with bar bore;
Ф31.8 +0.1/-0.3 mm, grip OD: Ф22.2+/-0.2 mm and both end ID: Ф16.8 mm.