Steve Meade SMD DD-1 CC-1 Combo Distortion Clip Detector + Crossover Calibrator

Description

Steve Meade SMD DD-1 CC-1 Combo Distortion Clip Detector + Crossover Calibrator
Description
The purpose and benefit of the D’Amore Engineering / SMD Distortion Detector.
The purpose of this tool is to enable the installer to set the gain of an audio amplifier to match the source unit’s output level, accurately and quickly. It can also be useful for detecting distortion in the audio signal caused by poorly designed or malfunctioning audio equipment.
What is included?
The Distortion Detector (DD-1))
Protective silicon rubber boot
Calibrated Test tone CD
Harness
This manual
Pride of ownership
About the design
When you pick up the DD-1, know that you are holding a precision piece of equipment. If treated as such it should provide you with many years of reliable service. We have chosen a 9V battery as a power source for a few reasons:
They are readily available
Isolating the DD1-1 from the vehicle’s electrical system for power, guarantees that it will only measure what it is supposed to measure; the audio signal, not noise in the charging system.
We also chose an RCA input connector for a few reasons:
It makes it pretty easy to measure the output of a headunit directly, if you choose to do so
Should the harness become damaged it is easily replaceable or repairable in the field
Specifications
The Distortion Detector’s circuitry is 100% analog
Distortion Detection trigger level > 1.0% Harmonic Distortion
Guaranteed operating range of input signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging
Signal Present LED trigger voltage 750mVrms
Low Battery LED trigger battery voltage < 5.6Vdc
Auto-shut off timer 8 - 10 minutes after ON button is pressed
Everyone hides these in the back of the book. We are proud of our specs, they aren’t lies, so we are putting them up front.
The purpose and benefit of the D’Amore Engineering / SMD Crossover Calibrator.
Most modern car audio amplifiers have a built in crossover on the side. Usually, it will start at 30hz and have a huge gap, all the way up to (sometimes) 500hz. The purpose of this tool is to enable the installer to set the crossover frequency of an electronic crossover to the desired frequency, accurately and quickly. Enter "Competition Mode" and easily match gains on any 4-channel amplifier or even multiple bass amplifiers. This is VERY important when using subwoofers that share a common chamber, especially if you have 2 (or more) amplifiers on a dual voice coil driver.
What is included?
The Crossover Calibrator (CC-1)
Protective silicon rubber boot
Calibrated Test tone CD
Harness
This manual
Pride of ownership
About the design
When you pick up the CC-1, know that you are holding a precision piece of equipment. If treated as such it should provide you with many years of reliable service. We have chosen a 9V battery as a power source for a few reasons:
They are readily available
Isolating the CC-1 from the vehicle’s electrical system for power, guarantees that it will only measure what it is supposed to measure; the audio signal, not noise in the charging system.
We also chose an RCA input connector for a few reasons:
It makes it pretty easy to measure the output of a headunit directly, if you choose to do so
Should the harness become damaged it is easily replaceable or repairable in the field
Specifications
Everyone hides these in the back of the book. We are proud of our specs, they aren’t lies, so we are putting them up front.
The Crossover Calibrator’s circuitry is digital microprocessor controlled
Crossover -3dB point accuracy +/- 0.25dB
Low Battery LED trigger battery voltage < 6.5Vdc
Auto-shut off timer 8 - 10 minutes after ON button is pressed
Payment
Shipping
Returns
CONTACT US
WARRANTY
FEEDBACK
Payment Information
We accept PayPal for all ebay orders. You can use your credit through PayPal as all major credit card are accepted by PayPal.
We accept PayPal for all international orders, your address must be verified with PayPal.
We are not responsible for any custom duties or brokerage fees that may apply for all international orders.
When you click on the Buy it Now button you are entering into a contract whereby you agree to purchasing the item at the price listed.
If you want to ship your item to an alternate address please add that address on your PayPal account and use the address as the default or confirmed address to pay us through PayPal
With Free Same Business Day Shipping we work to get you your order Fast.
All orders over 0 will require a signature for delivery.
All pre-selected shipping rates and methods are for customers with a valid residential or commercial address within the Contiguous 48 United States (PO Boxes address may require additional charges).
P.O. Boxes, APO/FPO addresses, Alaska, Hawaii, Puerto Rico, Guam, U.S. Virgin Islands, Northern Mariana Islands, American Samoa, Canada, and other countries may require additional shipping fees. Please contact a member of our team for detailed shipping charges.
Shipping is available only to PayPal verified addresses. When making payment please confirm your address has been verified with PayPal. Once payment is made shipping address can not be changed/altered. Payments made using an unverified PayPal address will be refunded and order will be canceled.
We will not accept request to change shipping address once payment has been made. Please confirm your shipping address is up-to-date and valid.
Typical handling time for orders is 1-business day. We do our best to ship every package with-in 1 business day of receiving a cleared payment. In some circumstances additional time may be need, in which case we will contact buyer.
Shipped orders that are returned by the shipping company due to an insufficient address or an undeliverable address will be refunded less a 20% restocking fee.
Orders refused at time of delivery and returned back to DBsCarAudio will be refunded less a 20% restocking fee.
Return Information
Return for Refund
All products that are being returned for Refund are accompanied by a
20% Restocking Fee
. The item must be in BRAND NEW Condition. No components missing (i.e. screws, bass knobs, plastic coverings, protective films, etc.) Failure to meet any of these requirements will result in a higher restocking fee or denial of return request. Store credit could be used towards purchase of any products of DBs Car Audio's store.
Shipping & handling charges are non-refundable. All refunds will be computed based on the unit cost. Products purchased with “Free Shipping” will have the UPS or USPS Rate deducted from their refund.
Return Procedure
Please message us for RMA procedures.Write the RMA number outside of the shipping box to where it is visible upon arrival. Any box without a visible RMA may result in refusal by our receiving department. Put the completed RMA FORM inside the box with your item. Any returned item without the completed form will result in delay in processing your request. Please send the item back to us in a standard shipping box with insurance. We are not responsible for any damage or missing items during shipment of the package.
Have a question about one of our items? Please message us through the eBay message platform.
Office Hours
Mon-Fri 9am to 5pm
Sat-Sun Closed
Warranty Information
All products except for tweeter's and driver's that have replacement diaphragm's come with a 1-Year Manufactures Warranty
All defective products will be covered under warranty except the following:
Physical Damage
Water Damage
Abuse, Accident, Misuse or Faulty Installation (Repeated returns for the same damage may be considered abuse unless accompanied by a receipt from professional installer)
Burnt voice coils
Customer is responsible for all shipping fees except for defective items
All DOA must be reported to DBs Car Audio through email or phone within 48-hours after receiving the product.
WE WILL GIVE YOU FEEDBACK AFTER YOU LEAVE YOURS.OUR GOAL IS TO OFFER 100% SATISFACTION ON PURCHASE TO OUR CUSTOMERS OR MONEY BACK.