Tune turnstange Lowriser 2.0 Riserbar Carbon Handlebar 29 17/32in 4.76oz Riser

Description

Tune gymnastics bar turnstange 2.0
Secure hold: the riser turnstange from tune
The turnstange for trail acrobats. Apart from the name, it has nothing in common with the steel tower from the gymnastics lesson. You can make an upswing, but you will only end up in the saddle. You don't have to fear anything there: racing, all-mountain and screw-on grips can easily be tolerated. Made by tune and fits perfectly with the Geiles Teil 4.0 stem.
To ensure your safety, this product has been subjected to the EFBe TRI test in addition to the EN standard.
The use of screw handles is possible due to the reinforced construction.
The 750 mm wide handlebar can be shortened as desired up to a maximum of 50 mm (to a total width of 650 mm) per side.
Technical specifications:
Area of ​​application: MTB, Trail, All Mountain
Material: Carbon, UD finish
Design: riser handlebars
Width: 750mm
Stem clamp: 31.8 mm
Rise: 15mm
Back sweep: 9°
Upsweep: 6°
weight: approx. 135 grams
Maximum rider weight: 100 kg
Features:
- Approved for use with screw grips
- not suitable for use with croissants
- ideal in combination with the Geiles Teil 4.0 stem
- comes as a 750mm version and can be shortened to 650mm
Manufacturer number:
LK0601
Note: The handlebar is not approved for enduro and downhill use.
You receive an invoice with VAT included
(only within Germany and the EU outside the EU without VAT)
You receive an invoice with VAT included
(only within Germany and the EU outside the EU without VAT)
The turnstange for trail acrobats. Apart from the name, it has nothing in common with the steel tower from the gymnastics lesson. You can make an upswing, but you will only end up in the saddle. You don't have to fear anything there: racing, all-mountain and screw-on grips can easily be tolerated. Made by tune and fits perfectly with the Geiles Teil 4.0 stem. To ensure your safety, this product has been subjected to the EFBe TRI test in addition to the EN standard. The use of screw handles is possible due to the reinforced construction. The 750 mm wide handlebar can be shortened as desired up to a maximum of 50 mm (to a total width of 650 mm) per side. Note: The handlebar is not approved for enduro and downhill use. (only within Germany and the EU outside the EU without VAT) (only within G